PA-E

PAE TankPAC TP-35 9.2 Gal Reverse Osmosis Tank Powder Coated Steel

Part Number: ROT-10W-14

Alt. Part Number: TP35, RO-760, RO-11, 55984-06, ROT-10B-34

In Stock

out of stock

In Stock

$99.99 Regular price $119.88 (17% Off)


The TankPAC TP-35 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post cured to ensure that your water is tasteless, odorless and contaminant free. The tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber.

Specifications:
  • Stainless steel water connection
  • High-grade chlorobutyl diaphragm
  • Virgin polypropylene liner
  • Two part epoxy primer, polyurethane paint finish
  • NSF-58 and CE approved
  • Also known as PAE TKE-TP35
Reverse Osmosis Tank Maintenance and Accessories:
A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.   
For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.   
The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.


Weight & Dimensions

Approx Weight

15.7 Lbs

Height W/O Stand

21.1 Inches

Details

Application

RO Water Storage

Capacity

5.5 Gallons @ 40 psi

Diameter

12.5 Inches

Diaphragm Materials

Butyl Rubber

Inlet/Outlet Size

1/4" MPT; 3/4" MPT

Material Of Construction

Steel

Max Operating Pressure

100 PSI

Origin

Taiwan

Air Valve Stem Location

Bottom

Inlet/Outlet Location

Top

Tank Pre Charge

6 PSI

Volume

9.2 Gallons

Warranty & Certifications

Certifications

NSF Certified to Standard 58

Warranty

1 year


PAE





The TankPAC TP-35 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post cured to ensure that your water is tasteless, odorless and contaminant free. The tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber.

Specifications:
  • Stainless steel water connection
  • High-grade chlorobutyl diaphragm
  • Virgin polypropylene liner
  • Two part epoxy primer, polyurethane paint finish
  • NSF-58 and CE approved
  • Also known as PAE TKE-TP35
Reverse Osmosis Tank Maintenance and Accessories:
A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.   
For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.   
The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.

Weight & Dimensions

Approx Weight

15.7 Lbs

Height W/O Stand

21.1 Inches

Details

Application

RO Water Storage

Capacity

5.5 Gallons @ 40 psi

Diameter

12.5 Inches

Diaphragm Materials

Butyl Rubber

Inlet/Outlet Size

1/4" MPT; 3/4" MPT

Material Of Construction

Steel

Max Operating Pressure

100 PSI

Origin

Taiwan

Air Valve Stem Location

Bottom

Inlet/Outlet Location

Top

Tank Pre Charge

6 PSI

Volume

9.2 Gallons

Warranty & Certifications

Certifications

NSF Certified to Standard 58

Warranty

1 year

Documentation
PAE

Reviews