The Neo-Pure Big Bubba Depth Cartridge replacement meets or exceeds Watt's BBC-150-D1 performance standards. A high efficiency 1 Micron Melt Blown filter cartridge compatible with the Big Bubba BBH-150 housing.
Features:
- Micron Rating: 1 µm
- Length: 26.25" (66.7 cm)
- Quantity per case: 1
- Flow Rate: 100 GPM
- Initial Pressure Drop: 40 PSID
- Temperature Rating: 175° F
- Change Frequency: 12 Months or as needed
- End Cap Material: Polypropylene
- Filter Media: Thermally bonded polypropylene
- Gaskets: EPDM
Easy Installation.
All of Neo-Pure Jumbo cartridges are quick and easy to change. It requires just three simple steps:
Steps for Installation:
- Remove swing bolts
- Remove lid.
- Rotate cartridge 1/4 turn and pull-up
- Whole house filtration
- Commercial filtration
- Industrial filtration
- Pre-filtration for RO equipment
- Community water systems
Disclaimer: Big Bubba® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.
Weight & Dimensions
Approx Length (Inches) | 26.25" |
Details
Cap Material | Polypropylene |
Cartridge Style | Twist-Off |
Case Quantity | 1 |
Flow Rate | 100 gpm |
Gaskets | EDPM |
Initial Pressure Drop | 40 psid |
Media Type | Thermally Bonded Polypropylene |
Micron Rating (Nominal) | 1 µm |
Operating Temperature Range | 175°F |
Intended Use:
The Neo-Pure Big Bubba Depth Cartridge replacement meets or exceeds Watt's BBC-150-D1 performance standards. A high efficiency 1 Micron Melt Blown filter cartridge compatible with the Big Bubba BBH-150 housing.
Features:
- Micron Rating: 1 µm
- Length: 26.25" (66.7 cm)
- Quantity per case: 1
- Flow Rate: 100 GPM
- Initial Pressure Drop: 40 PSID
- Temperature Rating: 175° F
- Change Frequency: 12 Months or as needed
- End Cap Material: Polypropylene
- Filter Media: Thermally bonded polypropylene
- Gaskets: EPDM
Easy Installation.
All of Neo-Pure Jumbo cartridges are quick and easy to change. It requires just three simple steps:
Steps for Installation:
- Remove swing bolts
- Remove lid.
- Rotate cartridge 1/4 turn and pull-up
- Whole house filtration
- Commercial filtration
- Industrial filtration
- Pre-filtration for RO equipment
- Community water systems
Disclaimer: Big Bubba® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.
Weight & Dimensions
Approx Length (Inches) | 26.25" |
Details
Cap Material | Polypropylene |
Cartridge Style | Twist-Off |
Case Quantity | 1 |
Flow Rate | 100 gpm |
Gaskets | EDPM |
Initial Pressure Drop | 40 psid |
Media Type | Thermally Bonded Polypropylene |
Micron Rating (Nominal) | 1 µm |
Operating Temperature Range | 175°F |
Documentation