Hydronix AR0020S53 AR Series 30" Filter

Home / Filters & Cartridges / Sediment Filters / Hydronix AR0020S53 AR Series 30" Filter

Hydronix

Hydronix AR0020S53 AR Series 30" Filter

Part Number: AR0020S53

Construction of melt-blown polypropylene fiber, Poly-Ray pleated filter combines exceptional solids holding capabilities with precise micron ratings better than depth filters. Double sheets of melt-blown media provide absolute particle retention, high solid loading and long service life. Poly-Ray filters are also designed for membrane pre-filtration.

Specifications:

End Cap Style - 222/Fin
Double-layer structure, absolute efficiency
100% polypropylene for compatibility with a wide range of process fluids
Manufactured in clean room, highly clean cartridge
Pre-flush with 18 Megohm-cm DI water, TOC content lower than 40 ppb
End configuration to fit all standard housings
Certificated by USP XXXIII and FDA CFR Title 21
Compatible with CUNO Betafine D and Polypro filtration
Compatible with Pall HDC II and Ultipleat Profile filtration

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Initial Pressure Drop	35.6 PSI Differential
Inner/Outer Wraps	Polypropylene
Max Psid	70 psid
Max Temp (°F)	203
Micron Rating (Absolute)	0.2 µm
O-Rings	Silicone
Psid@Flow Rate	2.8 psid @ 21.1 GPM
Cap Material	Polypropylene
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2-1/2"
End Cap Type	SOE 222 O-ring & Fin
Filter Construction	Melt Blown
Filter Type	Sediment Depth
Media Type	Poly-Ray Pleated Silicone
Micron Rating	0.2 µm ABS
Product Weight & Dimensions
Product Length	30"
Product Weight (lbs)	32

End Cap Style - 222/Fin
Double-layer structure, absolute efficiency
100% polypropylene for compatibility with a wide range of process fluids
Manufactured in clean room, highly clean cartridge
Pre-flush with 18 Megohm-cm DI water, TOC content lower than 40 ppb
End configuration to fit all standard housings
Certificated by USP XXXIII and FDA CFR Title 21
Compatible with CUNO Betafine D and Polypro filtration
Compatible with Pall HDC II and Ultipleat Profile filtration

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov