The GE Osmonics Desal A-Series, Thin-Film reverse osmosis membrane elements offer high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are used when high rejection and low operating pressures are desired.
Specifications:
- High Flux and Excellent NaCL Rejection
- Thin-Flim Reverse Osmosis Membrane Element
- 585 Gallons Per Day
- Dimensions: 4" x 14"
- Male End Connections
- Tape Outer Wrap
- 28 mil Feed Spacers
- Operating Pressures as low as 200 PSIG
Weight & Dimensions
Approx Length (Inches) | 14 Inches |
Details
Cartridge Style | Drop-in Element |
Diameter | 3.88 Inches |
Flow Rate | 585 Gallons per day |
Inner/Outer Wraps | Tape |
Max Operating Pressure | 450 PSI |
Max Operating Temperature | 122 Degrees Fahrenheit |
Active Area | 22 Square Feet |
Average Nacl Rejection | 99.5 Percent |
Chlorine Tolerance | 1000 ppm-hrs |
Cleaning Ph Range | 2-11.5 |
Direction | Outside - In |
Inlet Pressure | 225 PSI |
Max Feed Silt Density Index | <3 Silt Density Index |
Membrane Type | Spiral Wound |
Permeate Tube Diameter | 0.75 Inches |
Ph Range | 4-11 |
Max Feed Water Turbidity | <1 Nephelometric Turbidity Units |
The GE Osmonics Desal A-Series, Thin-Film reverse osmosis membrane elements offer high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are used when high rejection and low operating pressures are desired.
Specifications:
- High Flux and Excellent NaCL Rejection
- Thin-Flim Reverse Osmosis Membrane Element
- 585 Gallons Per Day
- Dimensions: 4" x 14"
- Male End Connections
- Tape Outer Wrap
- 28 mil Feed Spacers
- Operating Pressures as low as 200 PSIG
Weight & Dimensions
Approx Length (Inches) | 14 Inches |
Details
Cartridge Style | Drop-in Element |
Diameter | 3.88 Inches |
Flow Rate | 585 Gallons per day |
Inner/Outer Wraps | Tape |
Max Operating Pressure | 450 PSI |
Max Operating Temperature | 122 Degrees Fahrenheit |
Active Area | 22 Square Feet |
Average Nacl Rejection | 99.5 Percent |
Chlorine Tolerance | 1000 ppm-hrs |
Cleaning Ph Range | 2-11.5 |
Direction | Outside - In |
Inlet Pressure | 225 PSI |
Max Feed Silt Density Index | <3 Silt Density Index |
Membrane Type | Spiral Wound |
Permeate Tube Diameter | 0.75 Inches |
Ph Range | 4-11 |
Max Feed Water Turbidity | <1 Nephelometric Turbidity Units |