AXEON Water

Fresh Water Commercial Reverse Osmosis System by AXEON 4000 gpd - 220 Volt

Part Number: CRO-4000-FW-2

In Stock

out of stock

In Stock

$4,999.99


The Fresh Water CRO-4000-FW Commercial RO System is manufactured by AXEON exclusively to meet the demands of our customers. The system includes AXEON's HF5 extra low energy membranes, which operate at only 80 psi, conserving energy and putting less wear and tear on the other components of the system. The concentrate recycle valve and flow meter allow the system to run at recovery rates as high as 75% for greater efficiency and decreased water consumption.

Specifications:
  • Permeate Flow Rate: 4000 gpd
  • 1.5 HP Goulds multi-stage pump
  • Concentrate recycle valve for higher recovery rates
  • Concentrate recycle flow meter
  • Minitrol IF computer controller
  • Pre-treatment lockout
  • Tank level input
  • HM Digital PS-100 TDS controller
  • Uses AXEON HF5 Extra Low Energy Membranes 80 psi
  • Uses AXEON PVC pressure vessels
  • Flow meters installed on permeate and concentrate lines
  • Solenoid valve with manual bypass on feed line
  • Low pressure switch installed on feed line
  • Tank pressure switch
  • Feed flush controller
  • 5 micron sediment prefilter
  • 10 micron carbon block prefilter
  • 1 micron sediment prefilter
  • Pentek filter housings
  • Available in 220 volt 60 Hz

Upgraded Features of the CRO-7000-FW:
  • Concentrate Recycle Valve - needle valve controls the waste water being recycled back through the RO system
  • Minitrol IF Computer Controller - provides a 20 amp output relay for the RO pump and inlet solenoid, and monitors switch inputs from a pressure switch. These inputs allow the RO system to either run or shutdown as necessary.
  • Feed Flush - low flow feed water flush to reduce concentrated water on the RO membrane element
  • AXEON HF5 Extra Low Energy RO Membranes - operate at approximately 1/3 the operating pressure of standard high rejection membranes
  • Chemical Injection Pump Outlet - ready for an antiscalant injection system
  • High Pressure Tank Switch - shuts the system off when pressurized RO tank is full
  • Electronic Float Switch - shuts the system off when atmospheric tank is full
System Benefits:
  • Made in the USA
  • 1 year limited warranty
  • CE Compliant
  • Pre-plumbed, wired and assembled
  • Lightweight, non-corrosive powder-coated aluminum frame
  • Factory tested and preserved
  • Integrated sediment and carbon prefiltration
  • Low operating and maintenance costs 

 Applications:
  • Aquarium
  • Beverage Production
  • Bottled Water
  • Electronics
  • Drinking Water 
  • Food Processing
  • Food & Ice Preparation
  • Misting
  • Pharmaceutical
  • Spot-Free Rinse 


Weight & Dimensions

Prefilter Length

4.5" x 20"

Approx Weight

235 Lbs

Dimensions

30" x 38" x 47"

Details

Feed Water Source

City Water, Well Water

Recovery Rate (Adjustable)

Up to 75%

Ambient Temperature Range

40 - 120 Degrees Fahrenheit

Application

Aquarium, Beverage Production, Bottled Water, Electronics, Drinking Water, Food Processing, Food & Ice Preparation, Misting, Pharmaceutical, Spot-Free Rinse, Greenhouse, Whole House, Humidifiers, Boiler Feed Water

Capacity

4000 Gallons per day

Connections

1" FNPT

Filter Application

5µm Sediment Filter, 10µm Carbon Block, 1µm Sediment Filter

Flow Rate

5.78 - 14.0 Gallons Per Minute, 2.78 Gallons Per Minute

Inlet Size

1" FNPT

Liquid Temperature

40 - 85 Degrees Fahrenheit

Max Operating Pressure

150 PSI

Origin

Made in the USA

Power

1.5 Horse Power

Type

Multi-Stage, Free Standing

Voltage

220V 60Hz

Average Nacl Rejection

98.5 Percent

Cleaning Ph Range

2 - 12

Contaminants Reduced

1 Nephelometric Turbidity Units

Inlet Pressure

45 - 85 PSI

Rating

<3 Silt Density Index

Ph Range

5 - 11

Membrane Size

4" x 40"

Max Chlorine Content

0 Parts per Million Free Chlorine

Max Tds Content

2000 Parts per Million

Min Flow Rate

3.0 Gallons Per Minute

Membrane Quantity

2, 1

Warranty & Certifications

Warranty

1 year




The Fresh Water CRO-4000-FW Commercial RO System is manufactured by AXEON exclusively to meet the demands of our customers. The system includes AXEON's HF5 extra low energy membranes, which operate at only 80 psi, conserving energy and putting less wear and tear on the other components of the system. The concentrate recycle valve and flow meter allow the system to run at recovery rates as high as 75% for greater efficiency and decreased water consumption.

Specifications:
  • Permeate Flow Rate: 4000 gpd
  • 1.5 HP Goulds multi-stage pump
  • Concentrate recycle valve for higher recovery rates
  • Concentrate recycle flow meter
  • Minitrol IF computer controller
  • Pre-treatment lockout
  • Tank level input
  • HM Digital PS-100 TDS controller
  • Uses AXEON HF5 Extra Low Energy Membranes 80 psi
  • Uses AXEON PVC pressure vessels
  • Flow meters installed on permeate and concentrate lines
  • Solenoid valve with manual bypass on feed line
  • Low pressure switch installed on feed line
  • Tank pressure switch
  • Feed flush controller
  • 5 micron sediment prefilter
  • 10 micron carbon block prefilter
  • 1 micron sediment prefilter
  • Pentek filter housings
  • Available in 220 volt 60 Hz

Upgraded Features of the CRO-7000-FW:
  • Concentrate Recycle Valve - needle valve controls the waste water being recycled back through the RO system
  • Minitrol IF Computer Controller - provides a 20 amp output relay for the RO pump and inlet solenoid, and monitors switch inputs from a pressure switch. These inputs allow the RO system to either run or shutdown as necessary.
  • Feed Flush - low flow feed water flush to reduce concentrated water on the RO membrane element
  • AXEON HF5 Extra Low Energy RO Membranes - operate at approximately 1/3 the operating pressure of standard high rejection membranes
  • Chemical Injection Pump Outlet - ready for an antiscalant injection system
  • High Pressure Tank Switch - shuts the system off when pressurized RO tank is full
  • Electronic Float Switch - shuts the system off when atmospheric tank is full
System Benefits:
  • Made in the USA
  • 1 year limited warranty
  • CE Compliant
  • Pre-plumbed, wired and assembled
  • Lightweight, non-corrosive powder-coated aluminum frame
  • Factory tested and preserved
  • Integrated sediment and carbon prefiltration
  • Low operating and maintenance costs 

 Applications:
  • Aquarium
  • Beverage Production
  • Bottled Water
  • Electronics
  • Drinking Water 
  • Food Processing
  • Food & Ice Preparation
  • Misting
  • Pharmaceutical
  • Spot-Free Rinse 

Weight & Dimensions

Prefilter Length

4.5" x 20"

Approx Weight

235 Lbs

Dimensions

30" x 38" x 47"

Details

Feed Water Source

City Water, Well Water

Recovery Rate (Adjustable)

Up to 75%

Ambient Temperature Range

40 - 120 Degrees Fahrenheit

Application

Aquarium, Beverage Production, Bottled Water, Electronics, Drinking Water, Food Processing, Food & Ice Preparation, Misting, Pharmaceutical, Spot-Free Rinse, Greenhouse, Whole House, Humidifiers, Boiler Feed Water

Capacity

4000 Gallons per day

Connections

1" FNPT

Filter Application

5µm Sediment Filter, 10µm Carbon Block, 1µm Sediment Filter

Flow Rate

5.78 - 14.0 Gallons Per Minute, 2.78 Gallons Per Minute

Inlet Size

1" FNPT

Liquid Temperature

40 - 85 Degrees Fahrenheit

Max Operating Pressure

150 PSI

Origin

Made in the USA

Power

1.5 Horse Power

Type

Multi-Stage, Free Standing

Voltage

220V 60Hz

Average Nacl Rejection

98.5 Percent

Cleaning Ph Range

2 - 12

Contaminants Reduced

1 Nephelometric Turbidity Units

Inlet Pressure

45 - 85 PSI

Rating

<3 Silt Density Index

Ph Range

5 - 11

Membrane Size

4" x 40"

Max Chlorine Content

0 Parts per Million Free Chlorine

Max Tds Content

2000 Parts per Million

Min Flow Rate

3.0 Gallons Per Minute

Membrane Quantity

2, 1

Warranty & Certifications

Warranty

1 year


Reviews