Home / Plumbing / Check Valves / John Guest Acetal Angle Stop Valve w/Check Valve - 15mm x 15mm x 3/8"
John Guest

John Guest Acetal Angle Stop Valve w/Check Valve - 15mm x 15mm x 3/8"

Part Number: ASV4
Your price:
The John Guest Speedfit Angle Stop Valve provides an inline connection with shut off and integrated check valve and are used to connect fridge-freezers, water filtration equipment and vending machines. The 2-in-1 push-fit fitting has a shut off valve for isolating water during installation or maintenance work and a check valve to prevent backflow and the risk of contamination. Simply push the John Guest Speedfit angle stop valve fully onto the pipe. To disconnect, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by  removing the need for hot works and tools. 

Features:
  • 2-in-1 shut off valve and check valve for isolation and backflow prevention
  • Suitable for hot and cold water only, not suitable for heating systems
  • Connect and disconnect in seconds without tools
  • Safe flame-free installation, with no hot works, glue or flux
  • Integrated ¼ turn handle instantly isolates water
  • Grip & Seal collet with stainless steel teeth and main O-Ring seal
  • Compatible with PEX and polybutylene plastic pipe (inserts required) and copper pipe
  • Suitable for hot and cold water (not suitable for central heating systems)


Note: It is recommended to use pipe inserts to prevent over constriction of pipe from compression fittings.


California residents Prop 65 Warning
WARNING!
This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov