Pro Filter-Mate SaniWell Sanitizer

WS06N Pro Products

Part Number: WS06N
This item is no longer available. We have replaced it with:
Well Safe Well Sanitizer Kit

Pro Products Filter-Mate Saniwell Well Sanitizer Kit Applications:


  • Disinfects (potable) Drinking Water
  • Can also be used to purify storage tanks, well casings, fixtures and pipes
  • Should be used twice a year for maximum results

Public Systems:
Mix a ratio of 1 ounce of this product to 6,000 gallons of water. Begin feeding this solution with a hypochlorinator until a free available chlorine residual of at least 0.2 ppm and no more than 0.6 ppm is attained throughout the distribution system. Check water frequently with a chlorine test kit. Bacteriological sampling must be conducted at a frequency no less than that prescribed by the National Primary Drinking Water Regulations. Contact your local Health Department for further details.

Individual Water Systems:
Dug Wells
- Upon completion of the casing (lining) wash the interior of the casing (lining) with a 100 ppm available chlorine solution using a stiff brush. This solution can be made by thoroughly mixing 1 ounce of this product into 40 gallons of water. After covering the well, pour the well sanitizer solution into the well through both the pipe sleeve opening and the pipeline. Wash the exterior of the pump cylinder also with the well sanitizer solution. Start pump and pump water until strong odor of chlorine in water is noted. Stop pump and wait at least 24 hours. After 24 hours flush well until all traces of chlorine have been removed from the water. Contact your local Health Department for further details.

Drilled, Driven & Bored Wells - Run pump until water is as free from turbidity as possible. Pour a 100 ppm available chlorine well sanitizer solution into the well. This solution can be made by thoroughly mixing 1 ounce of this product into 40 gallons of water. Add 5 to 10 gallons of clean, chlorinated water to the well in order to force the well sanitizer into the rock formation. Wash the exterior of pump cylinder with the well sanitizer. Drop pipeline into well, start pump and pump water until strong odor of chlorine in water is noted. Stop pump and wait at least 24 hours. After 24 hours flush well until all traces of chlorine have been removed from the water. Deep wells with high water levels may necessitate the use of special methods for introduction of the sanitizer into the well. Consult your local Health Department for further details. Flowing Artesian Wells - Artesian wells generally do not require disinfection. If analyses indicate persistent contamination, the well should be disinfected. Consult your local Health Department for further details.

Well Sanitizer Kit (WS06N) Features:


  • Versatility- can be used to purify and eliminate harmful bacteria in storage tanks, fixtures, pipes as well as well casings.

Specifications:


Size: 1lb
Quantity: 6
Dimensions
1 lb
Operating Conditions
Lubricants
Mouse over for more information.

ACCESSORIES

Well Safe Well Sanitizer Kit


SENTRY-WSP
$19.99
Qty: