Dow 111 O-Ring Lubricant - 6 Gram Pillow Pack

21912-02 O-RINGSSH143495
Mouse over to view larger image.

On Sale

Part Number: 21912-02
Alt. Part Number: SH143495
In Stock, Ready to Ship!
MSRP: $2.20
Price: $1.57 
10+ for $1.18 ea
50+ for $1.02 ea

How do we compare?
$3.99 $2.42 more ea @ WaterFiltersOnline
  as of Aug 14, 2018

21912-02 O-Ring Lube

  • Good resistance to most chemicals
  • Wide service temperature range (-40°C to +200°C)
  • Low vapor pressure
  • Low volatility
  • Excellent water resistance
  • Composition
  • Silicone oil
  • Inorganic thickener
  • Additives

Dow 111 O-Ring Lubricant - 6 gram Pillow Pack Applications

  • O-Ring silicone lubricant for control and pressure plug valves, water softener and faucet valves
  • Sealant for vacuum and pressure systems
  • Sealant for outdoor equipment (also shipboard) subject to washing and harsh environment exposure: meters, electrical service entrance and underground connections
  • Damping medium for dash pots in electrical and electronic equipment
  • Chemical barrier coating
  • Used as an anti-stick and sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout
  • Rubber and plastic O-rings, gaskets and seals
  • NSF 51, NSF 61 approved and is acceptable as a release agent under FDA 21 CFR 175.300, when used in accordance with that regulation
  • Maintains a serviceable consistency from approximately -70° to 400°F (-57° to 204°C)

Application Instructions

  • Dow 111 Silicone Lubricant can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up; test prior to use.
  • A thinner consistency can be achieved by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone. Dow 111 Silicone Lubricant can then be applied by brushing, dipping or spraying.
  • Dow 111 Silicone Lubricant should not be applied to any surface which will be painted or finished. Such coatings may not adhere to the silicone-treated surface. If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting.

More technical information
Material Safety Data Sheet
6 gram
Operating Conditions
-40 - 200°C
O-Ring grease
Mouse over for more information.