HM Digital PM-2 External Inline TDS Purity Monitor

Part Number: PM-2


Fitting Options

1/4" push-in
PM-2-25
Qty:  
3/8" push-in
PM-2-38
Qty:  
1/2" push-in
PM-2-50
Qty:  

HM Digital PM-2 External Inline TDS Purity Monitor Features


The HM Digital PM-2 External Inline TDS Purity Monitor is ideal for use with water coolers or other enclosed water purification systems. The PM-2 alerts you when the filtration system requires service.

  • Available with 1/4", 3/8" or 1/2" quick connect fittings
  • External single line internal TDS monitor that is ideal for most water purification systems.
  • Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point.
  • Set points of any even number between 2 and 200 ppm


HM Digital PM-2 Specifications:


  • Range: 0-200 ppm (mg/L)
  • Accuracy: +/- 2%
  • Calibration: factory calibrated
  • Alert: warning light, optional alarm
  • Light color: either red or yellow
  • Light function: either flashes or is steady
  • Alarm: beeps for 20 seconds, then goes silent
  • Power source: AC 110V / 220V ±2%
  • Cable length: 62.86 cm (24.75")
  • Fittings: 1/4" standard, also available with 3/8" or 1/2"
  • Dimensions: 12.9 x 7.3 x 6 cm (5 x 2.9 x 2.4 in.)
  • Weight: 340 g (12 oz.)

Certifications
Dimensions
Operating Conditions
General
Mouse over for more information.

Customers who purchased this item also bought:

DigiFlow Meter 6000R, 0.45 - 4.10 gpm, 3/8 fpt
FWS # DF066
$36.99 
Qty:
Watts Flowmatic 50 GPD 5 Stage RO System GTS-550
FWS # GTS-550S
$164.99 
Qty:
Mr Drain Air Gap MD-10A - 1.5" or 2" Standpipes
FWS # 34700
$18.97 
Qty:
GE Merlin High Capacity Carbon Block Prefilter, 12,000 gal
FWS # FCG-MERLINPRE
$23.95 
Qty:
Double Clip 2.5" x 2.5" diameter
FWS # PPC222W
$1.85 
Qty:
Water Factory Systems SQC4 47-55700G2-S4 Bulk Water Filter Pack
FWS # 47-55700G2-S4
$268.21 
Qty:

This item can be found in the following categories: