PAE TP-16P Reverse Osmosis Plasteel Storage Tank 4 Gal

ROT-4P PA-E
Mouse over to view larger image.
You might like:

NSF Certified  BPA Free 

Model: TP-16P
Part Number: ROT-4P
In Stock, Ready to Ship!
MSRP: $45.91
Price: $32.79 
Qty:  


PAE TP-16P Reverse Osmosis Plasteel Storage Tank 4 Gal


The PAE TP-16P RO Tank is a steel five-gallon reverse osmosis tank with a polypropylene outer and inner layer. The TP-16P is constructed using FDA approved materials and has been extensively tested to ensure quality. This tank is also known as the ROT-4P.

  • Steel tank wrapped in a plastic polypropylene shell
  • Post-cured butyl rubber diaphragm
  • Inlet/Outlet size: 1/4" MPT
  • Capacity: 4 gallons
  • Maximum working pressure: 100 psi
  • Pre-charged at 6 psi
  • Max temperature: 104°F

PAE TankPAC TP-16P RO Tank Specifications
Tank Volume Comparison Chart

Reverse Osmosis Tank Maintenance and Accessories:

A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.

For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.

The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.

Eletrical
Tank Specifications
4.2 ft3
4 gallons ft3
7 psi
1/4" MPT
Top
Bottom
Dimensions
14.6 "
9.8 "
8.82 lbs
Operating Conditions
104 °F
100 psi
Butyl Rubber
Certifications
NSF Certified to Standard 58
Warranty
1 year
Mouse over for more information.