Stenner 30G NAT TANK/ FP PUMP Econ FP Series Pump with 30 Gallon Tank #F Tube 4.5 GPD System

Stenner 30G NAT TANK/ FP PUMP Econ FP Series Pump with 30 Gallon Tank #F Tube 4.5 GPD SystemShow Picture 1Show Picture 2Show Picture 3
Mouse over to view larger image.
You might like:

NSF Certified 

Part Number: S3NE20PHF81S
In Stock, Ready to Ship!
Qty Price
$433.43 / 120 volt

Stenner 30G NAT TANK/ FP PUMP S3NE20PHF81S Econ FP Series Pump with 30 Gallon Tank #F Tube 4.5 GPD System 

The Stenner S3NE20PHF81S Econ FP Pump with 30 gallon tank features a flow activated pump which is specifically designed to interface with a dry contact water meter, dry contact flow switch, or a 12-24 VAC/VDC signal from any control equipment. This flow activated pump can be used with meter systems or other control systems that respond to flow. The tank features a childproof lid and rain-roof. The tank is constructed from Polyethylene and is NSF 61 & 372 certified.

Stenner Econ FP Series Pumps are small but powerful. The Stenner S3NE20PHF81S features the Econ FP Series Pump. This pump is built with three operating modes: seconds, flow switch and auxiliary. The flow rate for this pump is 4.5 gallons per day.

Stenner Econ 30 Gallon Tank is lightweight and UV resistant. The Stenner Econ 30 Gallon Tank is a white UV resistant tank that features a child resistant lid. This tank is constructed of Polyethylene and is lightweight.

Stenner Accessory Kit is shipped with each pump. The accessory kit includes 3 connecting nuts (1/4"), 3 ferrules (1/4"), 1 injection check valve, 1 weighted suction line strainer (1/4"), 1 twenty foot roll suction/discharge tubing (1/4"), 1 additional pump tube, and manual.

Additional Specifications:
  • Pump Capacity: 4.5 gpd
  • Max Temperature: 104°F
  • Cord Length: 10 foot
  • Tube Material: Santoprene
  • Tank Material: Polyethylene
  • Max Working Pressure: 80 psi
  • Series: FP flow activated pump
  • Tank Certification: NSF 61 & 372 approved

Stenner Tank System Specifications
NSF 61 & 372 approved
10 foot "
PC (pump), HDPE (tank)
Operating Conditions
Up to 104 °F
80 psi
Self prime up to 25 ft.
Pump Specifications
4.5 GPD
0.17 AMP
Mouse over for more information.

Customers who purchased this item also bought:

Stenner Econ FP Series Output Pump 4.5 GPD #F Tube 120V
Stenner Plastic Water Meter 3/4" 1PPG
FWS # JLP0750-1PPG

This item can be found in the following categories: