PAE RO-105 Reverse Osmosis Storage Tank Powder Coated Steel 0.5 Gal

0.5 Gal PAE Reverse Osmosis Tank Powder Coated SteelShow Picture 1Show Picture 2Show Picture 3
Mouse over to view larger image.
You might like:

NSF Certified  BPA Free 

Model: RO-105
Part Number: ROT-0.5-14
In Stock, Ready to Ship!
MSRP: $41.99
Price: $29.99 
Select Additional Options
Parker LIQUIfit LFPP4VFE4 Valve Female Elbow - 1/4 QC x 1/4 FPT +$5.09
Parker PP6VFE4-MG Valve Female Elbow - 3/8 QC x 1/4 FPT +$6.55
Tank Pressure Gauge (0-20 psi) +$8.79
Reverse Osmosis Sanitizing Maintenance Kit +$3.75

PAE RO-105 Reverse Osmosis Storage Tank Powder Coated Steel 0.5 Gal

The PAE RO-105 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post-cured to ensure that your water is tasteless, odorless and contaminant free. The tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber.

Certifications. The PAE RO-105 Storage Tank meets NSF Standard 58 and is CE Approved. 

Designed for Potable Water. The PAE RO-105 Storage Tank features a virgin polypropylene liner and a high-grade chlorobutyl diaphragm. 

Stainless Steel Water Connection. The PAE RO-105 Storage Tank uses stainless steel water connection for safe drinkable water.
Reverse Osmosis Tank Maintenance and Accessories:

A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.

For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.

The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.

Tank Specifications
0.5 Gallons
1/4" MPT
7.9 "
5.0 "
1.25 lbs
Operating Conditions
104 °F
100 psi
Butyl Rubber
NSF Certified to Standard 58
1 year
Mouse over for more information.