Watts WTMFAG Top Mount Air Gap Faucet with Monitor Features:
The Watts Top Mount Air Gap Faucet
is a solid brass base with a high long-reach spout. This faucet is also unique in that it is a top mount install: you can install this faucet from the top of your kitchen counter. The WTMFAG comes with a monitor, which reminds you when it is time to change the filters on your reverse osmosis system. The LED monitor displays a blue light until either 6 months have passed or your system has used 4000 gallons of water. The LED monitor will flash red, indicating it is time for a filter change. Watts recommends changing your battery each time you replace your filter cartridges.
- Top mount design
- Monitored timer alerts user when to change filters on RO system
- Faucet comes with tubing attached:
- 3/8" blue drinking water connection
- 1/4" red rinse water to air gap connection
- 3/8" black air gap to drain connection
If your current drinking water system utilizes 1/4" line to the faucet, you will need a reducing union
(Part# 6306-56-60WP2) to connect the 1/4" line to the new 3/8" line on the faucet.Watts Top Mount Faucets with Monitor Specifications
Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.