PA-E

PAE RO-122 Reverse Osmosis Storage Tank Powder Coated Steel 3.2 Gal

Part Number: ROT-3.2

Alt. Part Number: TKE-2200W, RO-122, 200100, WR-100

In Stock

out of stock

In Stock

$35.99

The PAE RO-122 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post cured to ensure that your water is tasteless, odorless and contaminant free. The tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber.

Features:
  • Stainless steel water connection
  • High-grade chlorobutyl diaphragm
  • Virgin polypropylene liner
  • Two part epoxy primer, polyurethane paint finish
  • Plastic tank stand included
  • NSF-58 and CE approved
  • Compatible with Amtrol RO-3 (140S723)
Reverse Osmosis Tank Maintenance and Accessories:
A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.
For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.
The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.


Compatible with:
Reverse Osmosis Storage TanksAqua Sky ROT-3, Amtrol RO-3 (140S723)

Weight & Dimensions

Length (inches)

14.5

Height (inches)

9.5

Width (inches)

9.5

Weight (lbs)

6

Height W/O Stand

14.6"

Details

Max Pressure (Psi)

100

Capacity

2 Gallons @ 40 psi

Diameter

9.8"

Diaphragm Materials

Butyl Rubber

Material Of Construction

Stainless Steel

Origin

Taiwan

Size

1/4"

Air Valve Stem Location

Side

Inlet/Outlet Location

Top

Tank Pre-Charge

7 PSI

Volume

3.2 Gallons

Inlet/Outlet Connection

1/4" MPT

Warranty & Certifications

Certifications

NSF Certified to Standard 58

Warranty

1 Year


PAE




The PAE RO-122 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post cured to ensure that your water is tasteless, odorless and contaminant free. The tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber.

Features:
  • Stainless steel water connection
  • High-grade chlorobutyl diaphragm
  • Virgin polypropylene liner
  • Two part epoxy primer, polyurethane paint finish
  • Plastic tank stand included
  • NSF-58 and CE approved
  • Compatible with Amtrol RO-3 (140S723)
Reverse Osmosis Tank Maintenance and Accessories:
A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.
For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.
The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.


Compatible with:
Reverse Osmosis Storage TanksAqua Sky ROT-3, Amtrol RO-3 (140S723)

Weight & Dimensions

Length (inches)

14.5

Height (inches)

9.5

Width (inches)

9.5

Weight (lbs)

6

Height W/O Stand

14.6"

Details

Max Pressure (Psi)

100

Capacity

2 Gallons @ 40 psi

Diameter

9.8"

Diaphragm Materials

Butyl Rubber

Material Of Construction

Stainless Steel

Origin

Taiwan

Size

1/4"

Air Valve Stem Location

Side

Inlet/Outlet Location

Top

Tank Pre-Charge

7 PSI

Volume

3.2 Gallons

Inlet/Outlet Connection

1/4" MPT

Warranty & Certifications

Certifications

NSF Certified to Standard 58

Warranty

1 Year

Documentation
PAE

Reviews