GE Water

9-7/8" Purtrex Sediment Depth Filter - 3 Mic (PX03-9 7/8)

Part Number: 93112

Alt. Part Number: 1193112, PX03-9 7/8, PX03-10

In Stock

out of stock

In Stock

$5.49

The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex’ true-graded density filter matrix captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. The filter incinerates to trace ash for easy disposal.

Features:
  • Lower density at the surface of the filter with progressively higher density towards the center
  • Contains no wetting agents, solvents, antistatic agents or binders
  • Meets the requirement of the FDA for food and beverage contact
  • Long filter life
  • Superior dirt holding capacity
  • Potable water filtration
  • Chemical filtration - wide chemical compatibility
  • Plating baths
  • Amine Filtration

Note: The Purtrex Sediment Depth Filters are available in a 1, 3, 5, 10, 20, 30, 50, and 75 micron levels and 9-3/4", 9-7/8", 10", 19-1/2", 20", 29-1/4", 30", 40", and 50" lengths, and various end caps.



Weight & Dimensions

Approx Length (Inches)

9-7/8"

Case Quantity

40

Height (inches)

2.5

Length (inches)

10

Weight (lbs)

0.025

Width (inches)

2.5

Details

Capacity

As Needed

Cap Material

Polypropylene

Cartridge Style

Drop-In

End Cap Type

Double Open Ended (DOE) - No Cap

Filter Application

Sediment/Dirt/Rust

Filter Construction

Melt Blown

Filter Type

Sediment Depth

Inner Diameter

1"

Media Type

Polypropylene

Micron Rating

3 µm

Micron Rating (Nominal)

3 µm

Outer Diameter

2-1/2"

Product Length

9-7/8"

Psid@Flow Rate

0.2 psid @ 3 GPM (Data based on 10" length filter)

Warranty & Certifications

Certifications

NSF 42

Certifications - (New)

NSF/ANSI 42


9-7/8"




The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex’ true-graded density filter matrix captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. The filter incinerates to trace ash for easy disposal.

Features:
  • Lower density at the surface of the filter with progressively higher density towards the center
  • Contains no wetting agents, solvents, antistatic agents or binders
  • Meets the requirement of the FDA for food and beverage contact
  • Long filter life
  • Superior dirt holding capacity
  • Potable water filtration
  • Chemical filtration - wide chemical compatibility
  • Plating baths
  • Amine Filtration

Note: The Purtrex Sediment Depth Filters are available in a 1, 3, 5, 10, 20, 30, 50, and 75 micron levels and 9-3/4", 9-7/8", 10", 19-1/2", 20", 29-1/4", 30", 40", and 50" lengths, and various end caps.


Weight & Dimensions

Approx Length (Inches)

9-7/8"

Case Quantity

40

Height (inches)

2.5

Length (inches)

10

Weight (lbs)

0.025

Width (inches)

2.5

Details

Capacity

As Needed

Cap Material

Polypropylene

Cartridge Style

Drop-In

End Cap Type

Double Open Ended (DOE) - No Cap

Filter Application

Sediment/Dirt/Rust

Filter Construction

Melt Blown

Filter Type

Sediment Depth

Inner Diameter

1"

Media Type

Polypropylene

Micron Rating

3 µm

Micron Rating (Nominal)

3 µm

Outer Diameter

2-1/2"

Product Length

9-7/8"

Psid@Flow Rate

0.2 psid @ 3 GPM (Data based on 10" length filter)

Warranty & Certifications

Certifications

NSF 42

Certifications - (New)

NSF/ANSI 42

Documentation
9-7/8"
Reviews