Part Number: QS250D Alternate Part Number: 250, P3, S6 Ultra Dynamics UV Lamps #:
250, P3, S6
Quartz Sleeve Dome One End For Ultra Dynamics 250 Replacement Quartz Sleeve for Ultra Dynamics UV models 250, P3, S6. Quartz Sleeve is Domed on one end. Origin: Fabricated in the USA Warranty: One year manufacturer warranty
UV Germicidal replacement lamps are highly lethal to virus, bacteria and mold spores. Fits Aquafine UV and many other models. Specifications: Length base to base (excludes pins): 33.785"-33.9" Length pin to pin: 33.19" Pin Configuration: single...
Part Number: 3098UVLM Alternate Part Number: 3098LM, ZCSPL3098 Ultra Dynamics UV Lamps #:
70085-153 , 1530UD
UV Germicidal replacement lamp 254nm Mauve lamp has a single contact pin on each end (double end). Fits Aquafine 60" UV (3098LM) for CSL 60 Series and RBE Series prior to 1999 (8R/60, 10R/60, 12R/60, 20R/60, 24R/60) and many other models...View Details
Part Number: 42213 Alternate Part Number: UL-213E Ultra Dynamics UV Lamps #:
EPDM O-Ring is 15/16" ID (approx) and seals the UV lamps for Ideal Horizon / Wedeco Models SRE-1-EP, SRE-E-EP, SRE-3-EP, SRE-4-EP, CI-S, IH-S, CI-L, IH-L, C & CD WITHOUT Ozone. O-Rings should be replaced with each lamp change out (2 per lamp).View Details
Part Number: QSD-892 Alternate Part Number: 7008-245, 2450UD,2450US Ultra Dynamics UV Lamps #:
Replacement Quartz Sleeve for UltraDynamic UV models with UV Lamp # 7001-803 (aka 8030UD, 2450UD). Fits models 500, 2000, 3500, S15. Quartz Sleeve is Domed on one end and measures approx 35-1/8" long. Origin: Fabricated in the USA Warranty: One...
Part Number: BA-2240UD Alternate Part Number: 2240UD
Ballast 110v for Ultra Dynamics Model 8102-LIE-15 / GUS-15 Replacement Ballast 120v / 60Hz for Ultra Dynamics Models 8102-LIE-15, 8101-GUS-15, 8102-HIE-5View Details
We offer Ultraviolet Germicidal and TOC Reduction Lamps for many Ultra Dynamic models including DW7, 7008248, S15, S30, 500, UD3, 1500, 2000, 3500, UDS4, DW9, Q1, DW6, P1, P2, P3, S3, 250, UDS4
Safety and Efficiency NOTE:
Bare skin contact with the quartz envelope must be avoided. Compoundsfrom the skin when heated on lamps operating at 600 to 850˚c will formpermanent etching (devitrification) on the quartz surface, decreasingUV energy transmission. A contaminated lamp eventually will overheatcausing premature failure. Alcohol wipes and rubber gloves are includedwith every purchase of a quartz sleeve or lamp. NOTE: In case ofcontact with bare skin, decontaminate lamp with alcohol wipe beforereturning to use.