Sun-Pure Replacement Lamp, UST-400, 3 gpm, 2 Pin The UST-400 Sun-Pure Replacement Lamp is compatible with the UST-400 120V and UST-400 230V UV Systems. The 2-pin configuration is specific to the UST-400-BALLAST . For optimum efficiency in your...
Part Number: UST-400-BALLAST Alternate Part Number: UST400-120V
Sun-Pure UST-400 Replacement Magnetic Ballast Sun-Pure replacement magnetic ballast for the old style with 2 pin configuration. Compatible with the UST-100, UST-200, UST-300 120V, and UST-400 120V UV Systems. NOTE: The ballast must be grounded to...
Part Number: UST-200-BALLAST-12VDC Alternate Part Number: 2D12-1-9-R
Sun-Pure UST-200-BALLAST-12VDC Replacement 12v DC Ballast, UST-200 The UST-200-BALLAST-12VDC is the replacement magnetic ballast for the 2 pin configuration UST-200-12VDC UV System . For the UST-200-12VDC UV System Lamp connector: 2 pin
Part Number: PPC204W Alternate Part Number: C-2000W, COSW, 244454, HF-CLIP1
Single Mounting Clip 2" Diameter Features: Filter clips are made from polypropylene for strength and flexability. Base clips or single clips are used for mounting inline stand-alone filters or membrane housings to a flat surface. Also known as...
Part Number: PPC208W Alternate Part Number: DC2000W, CODW
Double Clip 2" x 2 " diameter Filter clips are made from polypropylene for strength and flexability. Double clips or dual clips are used to support additional inline filters or membranes together. The 2" diameter clips are for standard inline...
Part Number: PPC205W Alternate Part Number: DC2500W, CDW
Double Clip 2" x 2.5" diameter Filter clips are made from polypropylene for strength and flexability. Double clips or dual clips are used to support additional inline filters or membranes together. The 2" diameter clips are for standard inline...View Details
The Sunpure Replacement Lamps are compatible with (120V - 60Hz), (220V - 50Hz), and (12Vdc).
Safety and Efficiency NOTE:
Bare skin contact with the quartz envelope must be avoided. Compounds from the skin when heated on lamps operating at 600 to 850˚c will form permanent etching (devitrification) on the quartz surface, decreasing UV energy transmission. A contaminated lamp eventually will overheat causing premature failure. Alcohol wipes and rubber gloves are included with every purchase of a quartz sleeve or lamp. NOTE: In case of contact with bare skin, decontaminate lamp with alcohol wipe before returning to use.