$1.99 Shipping on Most Orders Over $99

Alkaline Ionized Water Filters


Reverse Osmosis Alkaline Ionized Water Filter. Why buy an expensive Water Ionizer? Aptera Alkamag Alkaline Water filters are used with a Reverse Osmosis (RO) System to eliminate contaminants like chlorine, fluoride, lead, and viruses; while the Aptera filter increases the pH of your drinking water and lowers the ORP. The Aptera alkaline ionized water filter also does not require any electricity and produces alkaline water with longer lasting effects, as opposed to electronic water ionizers unstable alkaline water which dissipates within 24 hours.
Alkaline Filter Installation
Filter Media Inside
Acidic vs Alkaline Water
Alkaline Ionized FAQ's
Help with Alkaline Ionized RO Water Filter

Products


Aptera Alkamag Alkaline Water FilterAptera Alkamag Alkaline Ionized Water Filter Cartridge
Part Number: APTERA-2510
  • 10 Stage Alkaline Water Filter
  • Increase the ph of your water
  • Lowers the ORP
  • Designed as RO Postfilter
  • Fits into slimline housing
  • Country of Origin: Made in the USA with US and Foreign Components
  • Flow Rate: .025 -.5 gpm
  • Capacity: 500-1000 Gallons
View Details
MSRP: $199.99
$98.98 

Qty:  

Compare

Pentek RO-2550 4-Stage 50 GPD NSF Certified Reverse Osmosis SystemPentair Water RO-2550 4-Stage 50 GPD NSF Certified Reverse Osmosis System
Part Number: 161079
  • NSF/ANSI Certified Standard 58
  • Residential Point of Use Drinking Water System
  • Under the sink installation
  • 50 Gallon Per Day Thin Film Composite Membrane
  • High Capacity filters that reduce chlorine taste and odor
  • Includes Chrome Air Gap Faucet
  • Great tasting water for drinking and cooking
  • Not available for sale in California
    View Details
    MSRP: $239.61
    $194.99
    $149.99 

    Qty:  

    Compare

    Watts Premier 560060 11-1/2" pH Balance Ceramic Filter 1/4" QCWatts Premier 560060 11-1/2
    Part Number: 560060
    Alternate Part Number: 105376, F560060
    • Filter Application: Alkaline Water Filter, pH Correction
    • Feature: Includes two 1/4" QC Union Fittings
    • Flow Rate: 0.5 gpm
    View Details
    MSRP: $45.00
    $34.75 

    Qty:  

    Compare

    Watts Premier 9" pH Balancing Ceramic FilterWatts Premier 9
    Part Number: 560059
    • Filter Application: Alkaline Water Filter, pH Correction
    • Feature: Includes two 1/4" quick connect union fittings
    • Connections: 1/4" QC, 3/8" QC
    • Flow Rate: 0.5 gpm
    View Details
    MSRP: $37.00
    $27.95

    View Details

    Compare

    Aptera Alkamag Alkaline Inline Water FilterAptera Alkamag Alkaline Water Filter
    Part Number: APTERA-INLINE
    • 10 Stage Alkaline Water Filter
    • Increase the ph of your water
    • Lowers the ORP
    • Designed as RO Postfilter
    • Easily integrates with any RO System
    • Filter Application: Alkaline Water Filter
    • Connections: 1/4" FPT
    • Country of Origin: Made in the USA with US and Foreign Components
    • Flow Rate: .025-.5 gpm
    • Capacity: 500-1000 Gallons
    View Details
    MSRP: $199.99
    $98.98 

    Qty:  

    Compare

    Aptera Alkamag Alkaline Water Filter KitAptera Alkamag Alkaline Water Filter
    Part Number: APTERA-KIT
    • Alkaline Water Filter Kit includes:
    • Filter, Housing, Fittings & Tubing
    • Clear housing to see your filter at work
    • 10 Stage Alkaline Water Filter
    • Increase the pH of your water
    • Lowers the ORP
    • Designed as RO Postfilter
    View Details
    $124.49 

    Qty:  

    Single Mounting Clip 2.5" DiameterSingle Mounting Clip 2.5
    Part Number: PPC202W
    Alternate Part Number: CSWM, C2500W, PPC212, 244455, HF-CLIP2
    Single Mounting Clip 2.5" Diameter Features: Filter clips are made from polypropylene for strength and flexability. Base clips or single clips are used for mounting inline filters or membrane housings to a flat surface. The 2.5" diameter single...View Details
    MSRP: $2.25
    $0.91 

    25+ for $.64 ea
    50+ for $.50 ea
    100+ for $.32 ea

    Qty:  

    Double Clip 2" x 2.5" diameterDouble Clip 2
    Part Number: PPC205W
    Alternate Part Number: DC2500W, CDW
    Double Clip 2" x 2.5" diameter Filter clips are made from polypropylene for strength and flexability. Double clips or dual clips are used to support additional inline filters or membranes together. The 2" diameter clips are for standard inline...View Details
    $1.85 

    25+ for $1.30 ea
    50+ for $1.02 ea
    100+ for $.65 ea

    Qty:  

    Double Clip 2.5" x 2.5" diameterDouble Clip 2.5
    Part Number: PPC222W
    Alternate Part Number: DC3000, CDMM
    Double Clip 2.5" x 2.5" diameter Filter clips are made from polypropylene for strength and flexability. Double clips or dual clips are used to support additional inline filters or membranes together. The 2" diameter clips are for standard inline...View Details
    $1.85 

    25+ for $1.30 ea
    50+ for $1.02 ea
    100+ for $.65 ea

    Qty:  

    Standard Installation for an RO Alkaline Ionized Water Filter


    Below is a standard installation of the alkaline ionized filter with a 5 Stage Reverse Osmosis(RO)System.
    How to Install an Alkaline Ionized Filter on a Reverse Osmosis RO System

    About Filter Media Inside Alkamag Alkaline Water Filter

    10 different filter medias in the alkaline filter for RO systemsEach Ionizing Alkaline Water Filter contains 10 different medias that include; a neodymium magnetic module, and Tourmaline ceramic that emits Far Infrared Rays, Super Ceramic that contains over 10 minerals to impart a pleasant taste to the water, and Calcor that boosts the pH of the water.
    The 10 stage process starts with a high strength Neodymium Magnetic Module. Our Quartz Media is mined from California's Yuba Gold Fields and our special blend CalCor Media imparts a refreshing mineral taste to the water by dissolving Calcium Carbonate and Magnesium Dioxide into the water stream. Tourmaline Ceramic emits a high capacity of Far Infrared Rays and Negative Ions. The Negative Ion Ceramic Media discharges a high capacity of Negative Ions (above 800/cc). A Pi Ceramic layer further increases the waters pH and palatability while increasing the Oxidation-Reduction of the water molecule. The "Super Ceramic" layer contains over 10 Minerals and imparts a pleasant taste to the water emitting even more Far Infrared Rays. Almandine Garnet is a naturally occurring Gem Mineral with uniform physical, chemical, hardness, friability and micro-structure characteristics, which provide the essential properties for the water filtration process. The KDF Redox layer incorporates a special blend of high purity Copper and Zinc to reduce heavy metals, microorganisms, scale and is a listed Bacteriostat. The water exits through a Polishing Sediment Filter ensuring safe, clean, and crystal clear ionized drinking water.

    Alkaline Inoized Water Vs. Acidic Water

    A pH level of 7 is considered to be neutral, while most reverse osmosis and filtered tap water tends to be acidic. The Aptera RO Alkaline Water Filter raises the pH of your drinking water. The Aptera filter is also full of negatively charged ions that make your water a powerful antioxidant.
    Acidic verse Alkaline Water

    Alkamag RO Ionized Alkaline Water Filter FAQ's

    1. Will This Filter work with Any Reverse Osmosis (RO) System?
      Answer: Yes, the Aptera Alkamag Alkaline Filter can be used on any existing residential RO system. The Aptera filter needs to be placed on the permeate side of the membrane housing and before the holding tank to ensure the slowest flow rate for contact time with the media. The Aptera is available as an inline filter or a 2.5" x 10" cartridge.
    2. Do I need the Regular Filter, Inline Filter, or The Kit?
      Answer: Most customers will be using the Inline Aptera filter when retrofitting their existing RO system, but if your RO system is plumbed to utilize one of the vertical sumps as a post filter after the membrane, then use the 2.5" x 10" cartridge for superior remineralization and contact time. Use the filter kit to re-plumb your existing system if you don't want to use the inline version.
    3. What is the PH Level of the water with and without Filter?
      Answer: The pH level from RO systems will vary depending on influent water but can range from 5 to 6 pH. After installing the Aptera Alkaline Filter in it's proper location, pH levels can range from 7 to 10 pH.
    4. How long will the filter last?
      Answer: Over time the media in the Aptera Aklaline Ionizing RO filter will deplete and the pH level will move towards equalizing at 7 pH. This time period will vary depending on influent water conditions and water usage, but should be replace once a year, if not sooner.
    5. Will the filter remove any other contaminates?
      Answer: The Aptera Alkaline Filter is designed as a remineralization device and does not remove or reduce any contaminants from the water, but puts beneficial mineral back into your RO water to raise the pH and lower the ORP of your drinking water