Harmsco® 801-100W 9-3/4" Premium Pleated Filter 100 mic

The Harmsco 801 series filters are highly efficient water cartridges made of pleated Polyester-Plus filter media. The Harmsco 801-100 pleated water filter offers benefits such as low pressure drop, high flow capability, increased contaminant removal, long filter runs, re-usability, and the lowest cost per gallon of filtered water.

Specifications:

Pleated design with up to 50% more surface area than competitive filters resulting in superior performance and increased contaminant removal
The Harmsco 801-100 water filter has a longer filtration runs for fewer change-outs and less maintenance
Low pressure drop
Thermally bonded for longer usable life
Recommended Flow Rate: 6 gpm
FDA approved materials - NSF 61 certified
Engineered media for superior performance

Disclaimer: Harmsco® is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and Fresh Water Systems, Inc. of any nature whatsoever.

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Core Material	Molded ABS or Rigid PVC
Max Temp (°F)	140
Micron Rating (Nominal)	100 µm
Recommended Flow Rate	6 GPM
Surface Area	6 Square Feet
Cap Material	Plastisol (Pliable PVC)
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2-3/4"
End Cap Type	Double Open Ended (DOE)
Filter Construction	Pleated
Filter Type	Pleated
Flow Rate	6 GPM
Media Type	Polyester
Micron Rating	100 µm
Origin	U.S.A.
Warranty & Certifications
Product Certification Standard	NSF/ANSI 61
Shipping Dimensions
Shipping Length	9.75 in.
Shipping Width	2.75 in.
Shipping Height	2.75 in.
Product Weight & Dimensions
Product Length	9-3/4"
Product Weight (lbs)	0.264

Product Details
Core Material	Molded ABS or Rigid PVC
Max Temp (°F)	140
Micron Rating (Nominal)	100 µm
Recommended Flow Rate	6 GPM
Surface Area	6 Square Feet
Cap Material	Plastisol (Pliable PVC)
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2-3/4"
End Cap Type	Double Open Ended (DOE)
Filter Construction	Pleated
Filter Type	Pleated
Flow Rate	6 GPM
Media Type	Polyester
Micron Rating	100 µm
Origin	U.S.A.
Warranty & Certifications
Product Certification Standard	NSF/ANSI 61
Product Weight & Dimensions
Product Length	9-3/4"
Product Weight (lbs)	12.48