Neo-Pure Postfilter Retrofit Kit for SteamPure Distiller

Postfilter Retrofit Kit for SteamPure Distiller


Show Picture 1Show Picture 2Show Picture 3Show Picture 4

Economical Post Filter for your SteamPure Water Distiller

Part Number: LID-PFC-02

Price: $32.00 
Qty:  


Neo-Pure Post filter Retrofit Kit for SteamPure Distiller


The economical SteamPure Water Distiller Post Filter Retrofit Kit utilizes a simple to use post filter cup that contains coconut shell granular activated carbon to polish your distilled water from any remaining tastes or odors, as well as any VOC's.

  • BPA Free Economical Water Distiller Post Filter
  • Six Post Filter Cups per pack
  • Includes post filter lid & elbow fitting
  • Replace post filter every two months

How to use the Neo-Pure Post Filter Retrofit Kit:


Before using a post filter cup, submerse the post filter cup in some hot water for 10 minutes to condition the filter and release any air bubbles, then run some water through it to release any carbon fines. Replace the pour lid supplied with your SteamPure Distiller with the retrofit lid, and place the post filter into the center hole. Insert the elbow fitting into the fitting supplied with your SteamPure, and place the jar under the fitting so that the distilled water will dispense into the post filter cup.

Customers who purchased this item also bought:

Glass Jar 1 Gallon with Pour Lid & Handle
FWS # GL01GWMF-LID
$6.70 
Qty:
John Guest Superseal Union - 3/8 Superseal x 3/8
FWS # SI041212S
$4.16 
Qty:
Lid for 1 Gallon Glass Jar
FWS # LID-110
$0.99 
Qty:
John Guest Superseal (both) Elbow Union - 3/8 x 3/8
FWS # SI401212S
$6.45 
Qty:
Postfilter for SteamPure & MD-4 Distillers - 4 Pak
FWS # 19016
$36.95 
Qty:

This item can be found in the following categories: