Kerick Mini Adjustable Float Valve – 1/2 MIP

Kerick Mini Adjustable Float Valve – 1/2" MIP Features:

• Adjustable arm can be used in the vertical or horizontal position
• Replaceable seals are made of long-wearing, chemical resistant Santoprene® rubber.
• Hardware made with 18-8 stainless steel
• Bodies made of NSF approved PVC
• Tested to 100 PSI
• Click here for flow chart

Specifications:

• Comes complete with jam nut, sealing washer, JACO compression nut and polyethylene float
• Flange to float tip measurement is 6.5" - Inlet adds approximately 1" to overall length
• Estimated flow rate of 1.5 GPM at 40 PSI
• 1/2" MIP inlet and free flow outlet
• Approximate diameter is 1.4"
• .093 orifice

Installation Diagram

Warranty

Due to the vast combination of components (valve sizes, orifice sizes, rod lengths & float sizes) Kerick Valve does not warranty this product for any particular purpose or use. Suitability of use and proper installation is the responsibility of the purchaser and/ or installer.

Limited Warranty

Should the valve not perform as designed due to material or workmanship defect within one year of installation or two years from manufacturing date whichever comes first, Kerick Valve will replace or repair the valve at its option. Liability is limited to cost or repair of float valve assemblies only.