We’re moving locations to better serve you! Shipping will continue as we relocate, but please pardon our delay during this process.
$1.99 Shipping on Most Orders Over $99

Aqua Treatment Services

ATS UV Lamps / Bulbs

ATS UV Lamps / Bulbs

Replacement Lamps / Bulbs for the DWS/SE models ultraviolet water purifiers from  Aqua Treatment Services. Lamp replacement is recommended every 10,000 hours of operation (approximately 14 months of continuous service).

05-1097 Atlantic UV Lamp for S23 & MP22
Atlantic UV Lamp for S23 & MP22
Mfg # ATS-2-436
FWS # 05-1097
$64.97
UVATS-4-739 UV Lamp for Aqua Treatment Services ATS-4-739
UV Lamp for Aqua Treatment Services ATS-4-739
Mfg # ATS-4-739, DSW-12V, EV12E, SE12V
FWS # UVATS-4-739
$69.97
ATS4-436 UV Lamp for ATS4-436
UV Lamp for ATS4-436
FWS # ATS4-436
$69.97
ATS1-805 UV Lamp for DWS-6 and DWS/SE7
UV Lamp for DWS-6 and DWS/SE7
Mfg # ATS-1-805, DWS-6, DWS-7, DWSW-6, SE-7
FWS # ATS1-805
$49.99
ATS4-450 UV Lamp for DWS-8V, EV-8E, SE-8V, SL-8, SL-8V, SL-5
$66.88
UV8030 UV Lamp for Ultra Dynamics 8030 / 8030UD / 7001-803 / 7011-621/ 6000-2
G36T5L UV Lamp Single Pin Double End 30
UV Lamp Single Pin Double End 30"
Mfg # ATS8-246, DWS-12, DWS-15, DWS-24, DWSW-12, SE15, SE24
ATS Quartz Sleeves

ATS Quartz Sleeves

Quartz Sleeves for the Aqua Treatment Services DWS model UV purifiers. Ordinary maintenance consists of cleaning the quartz sleeve once monthly or more frequently where conditions dictate.

QS-ATS6-608 Quartz Sleeve for DWS/SE15, DWS/SE24
$49.99
QS-ATS6-211 Quartz Sleeve for DWS/SE7
Quartz Sleeve for DWS/SE7
FWS # QS-ATS6-211
$39.99
QS-ATS-476D Quartz Sleeve for DWS-8V, EV-8E, SE-8V, SL-8, SL-8V, SL-5
$44.88
ATS Misc Parts

ATS Misc Parts

End Nut O-Ring OR-ATS8-544 is compatible with all DWS/SE Models
DWS/SE7   DWS/SE15   DWS/SE24

BA-ATS8-224 Ballast 120v, 60Hz, Magnetic for DWS-15 / UV-10A
$74.37
OR-ATS8-544 O-Ring EPDM for End Nut (quartz sleeve NO ozone)


Safety and Efficiency NOTE:
Bare skin contact with the quartz envelope must be avoided. Compounds from the skin when heated on lamps operating at 600 to 850˚c will form permanent etching (devitrification) on the quartz surface, decreasing UV energy transmission. A contaminated lamp eventually will overheat causing premature failure. Alcohol wipes and rubber gloves are included with every purchase of a quartz sleeve or lamp.  NOTE: In case of contact with bare skin, decontaminate lamp with alcohol wipe before returning to use.