We offer Genuine replacement Trojan UVMAX UV Lamps, Quartz Sleeves, Accessories and Parts. Each component Trojan system has been designed and developed through extensive research and development to be part of an overall system that operates safely and efficiently over its entire lifetime. Genuine Trojan UVMax lamps features include CSA certified, NSF certified, Environmentally friendly, and offers one-year warranty.
Replace Trojan UV Lamp Bulbs and O-Rings (sold separately) every 12 months. Clean quartz sleeve regularly, replace if extremely fouled or broken. For Trojan UV Max Pro10, Pro20, Pro30, G/Plus, H/Plus, and J/Plus, replace the Trojan UV Bulbs and O-Rings every 2 years. Clean quartz sleeve regularly, replace if extremely fouled or broken.
Replace UV Bulbs and O-Rings (sold separately) every 12 months. Clean quartz sleeve regularly, replace if extremely fouled or broken. For Trojan UV Max™ Models Pro10, Pro20, Pro30, G/Plus, H/Plus, and J/Plus, replace UV Bulbs and O-Rings every 2 years. Clean quartz sleeve regularly, replace if extremely fouled or broken.
Maintaining the Trojan UV Max system is easy. Simply clean the Trojan quartz sleeve periodically and replace the Trojan UV lamp once a year. See the chart below for replacement Trojan UVMax lamp/bulb parts for your particular model.
It is highly recommended to install a sediment prefilter (rated at 5 micron or less) before the Trojan UV unit to ensure that no sediment, algae, dirt, or other particles can shade the water. Viruses, bacteria and parasites can "hide" behind large particles and escape the UV lamp light. We recommend the either the HD-950, or HF-360 as prefilters to Trojan UV systems: Click here to browse our Sediment Filters.
NOTE: An adapter is necessary if you are replacing the following lamp part#.
Discontinued Lamp #
New Lamp #
UV Systems
602725
602803
Model A
602726
602804
Model B
602727
602805
Model C or D
602728
602806
Model E or PRO 7
602729
602807
Model F or PRO 15
Trojan Germicidal UV Lamp Safety and Efficiency NOTE:
Bare skin contact with the Trojan quartz sleeve envelope must be avoided. Compounds
from the skin when heated on lamps operating at 600 to 850˚c will form
permanent etching (devitrification) on the quartz surface, decreasing
UV energy transmission. A contaminated lamp eventually will overheat
causing premature failure. Alcohol wipes and rubber gloves are included
with every purchase of a quartz sleeve or lamp. NOTE: In case of
contact with bare skin, decontaminate lamp with alcohol wipe before
returning to use.