$1.99 Shipping on Most Orders Over $99

Ultra-Sun Tech®


Ultra-Sun Technologies specialize in the manufacturing of sterilization equipment for the medical industry, as well as components for the original equipment manufacturers in the water treatment industry. The Ultra-Sun water purifiers use 316 bonded stainless steel interiors that maximize power by reflecting UV light and eliminates the degradation of the polypropylene housing. The stainless steel does not leave a taste in your water.


Products


Sun-Pure UST-200 Ultraviolet System, 1 GPM 120V, w/ Electronic BallastSunpure Ultraviolet Water Purifier, 1 GPM 120V, w/ Electronic Ballast
Part Number: UST-200-V120-EB
Alternate Part Number: UST-200-V120
  • Flow Rate (30mJ/cm2 Dose): 1 gpm
  • Operating Pressure Range: 85 max psi
  • Inlet/Outlet: 1/4" Jaco
  • Chamber Material: Polypropylene w/Stainless Steel Lining
View Details
$111.00 

Qty:  

Compare

Sun-Pure UST-200 Ultraviolet System, 1 GPM 12VDCSunpure Ultraviolet Water Purifier, 1 GPM 120V, w/ Electronic Ballast
Part Number: UST-200-12VDC
  • Flow Rate (30mJ/cm2 Dose): 1.0 gpm
  • Operating Pressure Range: 85 psi
  • Inlet/Outlet: 1/4" Jaco
  • Chamber Material: Polypropylene w/Stainless Steel Lining
View Details
$130.00 

Qty:  

Compare

Sun-Pure UST-300 Ultraviolet System, 1.5 gpm, 120vSun-Pure UST-300 Ultraviolet System, 1.5 gpm, 120v
Part Number: UST-300-V120
  • Flow Rate (30mJ/cm2 Dose): 1.5 gpm
  • Operating Pressure Range: 85 psi
  • Inlet/Outlet: 1/4" Jaco
  • Chamber Material: Polypropylene w/Stainless Steel Lining
View Details
$129.00 

Qty:  

Compare

Sun-Pure UST-400 Ultraviolet System, 3.0 gpm, 120VSun-Pure UST-400 Ultraviolet System, 3.0 gpm, 120V
Part Number: UST-400-V120
  • Flow Rate (30mJ/cm2 Dose): 3.0 gpm
  • Operating Pressure Range: 85 psi
  • Inlet/Outlet: 1/4" Jaco
  • Chamber Material: Polypropylene w/Stainless Steel Lining
View Details
$149.00 

Qty:  

Compare

   

SAFETY AND EFFICIENCY NOTE:
Bare skin contact with the quartz envelope must be avoided. Compounds from the skin when heated on lamps operating at 600 to 850˚c will form permanent etching (devitrification) on the quartz surface, decreasing UV energy transmission. A contaminated lamp eventually will overheat causing premature failure. Alcohol wipes and rubber gloves are included with every purchase of a quartz sleeve or lamp.  NOTE: In case of contact with bare skin, decontaminate lamp with alcohol wipe before returning to use.