Ideal for small point-of-use (POU) applications such as post carbon filtration, or as an add on for residential RO systems. (1-4 GPM)
Learn More
Higher capacity systems can be used for point-of-entry (POE) applications for the whole house.
(2-15.1 GPM)

This line is ideally suited for commercial or industrial point-of-entry (POE) applications with high flow rates and constant flow demands. (8-40 GPM)
Learn More
Add a UV intensity monitor to the PA Series and you get the Sterilight Silver Plus Series. Great for applications where a monitoring system is required. (2-15.1 GPM)
Learn More
Use the SPV series for point-of-use (POU) disinfection or high-flow point-of-entry (POE), whenever an NSF certified system is required. (1.5 to 20 GPM)
Learn More
Great for light commercial or high-flow point-of-entry applications, these systems are economical when NSF certification is not required.
(18-52 GPM)

Compact systems which include 10" or 20" high flow housings, a lamp life counter, and is easy to install, low maintenance filters and lamps.
(8-13 GPM)

Perfect for light commercial applications, this line delivers a constant, reliable dose at a higher capacity.
(50-80 GPM)

Sterilight UV Systems designed for Vending machines and dispensing equipment. (2-6 GPM)
Learn More
Fresh Water Systems is a leading dealer of Sterilight UV and ultraviolet water sterilizer solutions. Sterilight ultraviolet water systems are highly effective because of the high output germicidal UV lamps. The Sterilight UV lamps provide an economical way of treating water requiring a 99.99% reduction in bacteria and viruses. Furthermore, this process is accomplished without adding any potentially harmful chemicals to your drinking water. Sterilight is the most ecological way of treating your water, and all this just for pennies a day!
Our Serilight UV systems are used in both residential and commercial applications. The Sterilight Silver is compact line of ultraviolet water sterilizers is ideally suited for point-of-use filtration, RO pre or post disinfection or with other applications requiring application flexibility. The Sterilight Cobalt series is ideal for commercial and industrial, point of entry applications with high flow rates and constant flow demands forUV treated water.
Bare skin contact with the quartz envelope must be avoided. Compounds from the skin when heated on lamps operating at 600 to 850˚c will form permanent etching (devitrification) on the quartz surface, decreasing UV energy transmission. A contaminated lamp eventually will overheat causing premature failure. Alcohol wipes and rubber gloves are included with every purchase of a quartz sleeve or lamp. NOTE: In case of contact with bare skin, decontaminate lamp with alcohol wipe before returning to use.
